Option Interaction Maintenance
Show/Hide All
Enter the option codes for which the interaction occurs, or click the Option Selection button to list all option codes. Each option code must be entered following the sequence of its option category, and all codes must be separated by a comma (,).
If an option category or option code is entered that is not defined for the current bill, a message will appear. Any undefined categories and codes are listed for verification. Use Bill of Materials Maintenance and Option Bill Maintenance to define any necessary categories and/or codes.
1. Header
Option Description 1, 2, and 3
Type an option description for this option interaction bill using up to three lines. This description should address any special action required by the current option interaction bill.
Enter the step number of the routing number on the base bill where the components for this option interaction are first required.
If the Work Order module is installed, click the Lookup button to list all step numbers for the routing defined for this bill.
Enter 0 (zero) to indicate that the processing operations for this option interaction are to be added before the first operation on the parent bill routing. This field is available only if a routing number is entered for this bill in Bill of Materials Maintenance.
2. Lines
The buttons located above the primary grid allow you to view item information, as well as extended item descriptions.
For more information, see:
Line Number
This field displays the line number in the grid and can only be viewed. The line number appears red for lines that are new or modified. After the Accept button is clicked, the line number changes from red to black.
Quick Row
This field displays the number of the selected row in the primary grid. Additional fields for the selected row appear in the secondary grid. Enter a row number to view or edit information for a different row, or click the Find Row button to search for a row in the Search Grid window.
Enter a component item code identifying the line item. Click the Lookup button to list all inventory item codes.
Alternately, start typing an item description to locate an item. As you type, a list of records matching your entry appears. You can then select an item from the list, and the item code will appear in the field.
At the Item Quantity Inquiry button, click the drop-down arrow and select Item Memo to view the memos for the item.
Right-click the item to view the selections available for the item. The right-click menu is available only for standard and kit bills.
Type /M and click the Lookup button to list all miscellaneous charge codes. You cannot add miscellaneous charge codes to kit bills. Kit bills can consist of only component items and comment lines.
Type /C and click the Lookup button to list all comments.
A new item can be added on the fly if the appropriate security is set up. A window similar to the Item Maintenance window appears; however, some nonessential fields are omitted to speed data entry. You can access Item Maintenance at a later time to complete the remaining entries for the new inventory item. For more information, see Add a New Inventory Item from Bill of Materials.
Enter a revision code for this bill, or click the Lookup button to list all revisions for this bill. Enter an asterisk (*) to indicate that the current revision for the bill will always be used. This field is available only if the Require Bill Revisions check box is selected in Bill of Materials Options, and if the item code entered in the Component Item Code field represents a bill. For more information, see Bill of Materials Options - Fields.
Enter the anticipated scrap percent to be incurred by this component during the manufacturing process, or click the Calculator button to enter an amount using the calculator. This field is available only if the Allow Scrap and Yield Percentage Factors check box is selected in Bill of Materials Options. For more information, see Bill of Materials Options - Fields.
A component used in an assembly has a scrap percentage of 10.000 (or .10). To produce a final yield of 45 components, 50 components must be produced. The calculation used is: 45 / (1 - .10) = 50.
Type the quantity of the component item or miscellaneous charge code required to complete one bill. The placement of the decimal is based on the entry format set in Common Information Options. When the parent item is manufactured, this number is multiplied by the total produced to determine the total quantity of component items to be relieved from stock. Only positive quantities can be entered if the Allow Entry of Negative Quantities check box is cleared in Bill of Materials Options. This field is not available if a miscellaneous charge code defined as a setup charge is entered in the Component Item Code field. Set up charges are defined in Miscellaneous Item Maintenance.
Type a comment for the component item code.
Note Press CTRL+ENTER to add a new line of text in the Comment field.
If you entered a miscellaneous charge code in the Component Item Code field, type a description of the charge associated with this miscellaneous charge code. If you entered an inventory item in the Component Item Code field, the description appears automatically.
If you entered an item code in the Component Item Code field, this field displays the standard unit of measure defined in Item Maintenance and can only be viewed.
If you entered a miscellaneous charge code in the Component Item Code field, this field displays the unit of measure defined in Miscellaneous Item Maintenance and can only be viewed.
Enter the general ledger cost account number for posting cost amounts associated with the miscellaneous charge code, or click the Lookup button to list all general ledger accounts. If the account number is longer than the field, use the left and right arrow keys to view the entire account number.
Accounts can be created in this field if the appropriate settings are defined in the Auto Create when all Segments are Valid field in General Ledger Options.
If you entered an item code in the Component Item Code field, this field displays the standard unit cost defined in Item Maintenance and can only be viewed.
If you entered a miscellaneous charge code in the Component Item Code field, this field displays the unit cost defined in Miscellaneous Item Maintenance and can only be viewed.
This check box appears selected if the item has an extended description and can only be viewed.
